MAN Site membership 900x250
Log In
Access Premium Site»
Not a member? Join today!

Blade mCP S RTF & BNF [VIDEO]

Blade mCP S RTF & BNF [VIDEO]

From Blade:
The Blade mCP S is the one-box solution for those wanting a collective pitch, flybarless, micro indoor powerhouse. Building on the popular mCP X, this heli now offers SAFE Technology in addition to AS3X, that makes learning on a collective pitch heli a breeze. It’s size makes it perfect for indoor flights, while linear servos, durable composite frame, and carbon main shaft and tail boom provide exceptional durability. The low part count makes repairs quick and easy. Powered by a 1S 210mAh battery, there is plenty of punch in the stock brushed motor, and more to be found with the optional micro brushless motor. SAFE Technology with progressive flight modes allow this heli to grow with each pilots skill level, making it great for intermediate pilots to pick up with the assurance of panic recovery. A vivid red canopy design makes it easy to keep orientation when learning advanced maneuvers. Offered Ready-to-Fly, everything you need is in one box.

SAFE® and AS3X® Technology Equipped Fight Modes

The mCP S is equipped with Horizon Hobby’s revolutionary flight control softwares, SAFE® and AS3X® Technology, allowing you to control your flight experience at the flick of a switch. The mCP S is equipped with three different flight modes and panic recovery that can grow with every intermediate pilot.

Stability Mode: Provides renowned self-leveling and bank angle limits. This mode is great for those getting a feel for the helicopter, or practicing orientation before stepping into more advanced modes.
Agility Mode: This mode does not provide any self-leveling and allows the pilot to perform mild 3D maneuvers such as inverted flight, flips, rolls and aggressive aerobatics. The rotor head speed is limited to a lower RPM in this mode.
3D Mode: This mode does not provide any self-leveling and allows the pilot to perform full 3D maneuvers such as inverted flight, funnels, and much more. The rotor head speed is increased to a higher RPM in this mode.
Panic Recovery Mode: At the flick of a switch, panic recovery will return the helicopter to a safe and level flight when the pilot gets into an uncomfortable orientation or maneuver.

Two Flight Batteries

The mCP S comes with two flight batteries out of the box, with both the Ready-to-Fly and Bind-n-Fly models, for even more indoor 3D fun.

Durable Components

Light and extremely durable components, like the carbon fiber tail boom, frame this micro helicopter allowing pilots to get back in the air after most crashes.

3D Capable

Built on the popular mCP X platform, the mCP S pushes the envelope of micro 3D flight, made even more enjoyable with the peace of mind of SAFE and AS3X Technology.

Optional Brushless Motor

Loving the 3D performance and wanting to kick it up a notch? The optional brushless motor and ESC combo upgrade takes the performance of the mCP S to the next level. Switching to the motor is quick and easy, it only takes a couple screws and a single connector.

Linear Cyclic Servos

Linear cyclic micro servos drive the swashplate for durable and responsive control in any situation.

Low Part Count

The simplicity of this helicopter and reduced part count make repair costs and repairs a breeze.

Included in the Box

Ready-to-Fly:

  • mCP S Helicopter
  • Two flight batteries
  • USB Charger
  • Spektrum MLP6 Transmitter w/ AA batteries

Bind-n-Fly:

  • mCP S Helicopter
  • Two flight batteries
  • USB Charger

#BLH5100 – mCP S RTF – $169.99
#BLH5180 – mCP S BNF – $139.99
Visit BladeHelis.com
See more posts about Blade

Blade mCP S RTF & BNF (1) Blade mCP S RTF & BNF (2) Blade mCP S RTF & BNF (3) Blade mCP S RTF & BNF (4) Blade mCP S RTF & BNF (5)

Updated: July 20, 2017 — 3:48 PM
Hobbico T16SZ 600x120
FPV/Photodrone 600x120

Leave a Reply

Your email address will not be published. Required fields are marked *

Airage Media © 2017
WordPress Lightbox