Log In
Access Premium Site»
Not a member? Join today!

Futaba 10C FASST 2.4GHz In for Review

This new radio system just came in. Watch for a MAN review in the next issue.

This airplane version which will default to airplane settings,
with mode 2 stick operation when powered up and has a ratcheted throttle stick.


  • Futaba’s FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts andinterruptions unlike other 2.4GHz systems that only stay on one or two frequencies
  • Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude
  • Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands from this transmitter-with over 134 million possible codes there is no chance for a conflict
  • No hassle Fail Safe programmed through transmitter-no complicated set-up steps or binding plugs When performing a ground check, the Power Down function allows modeler to reduce power from up to 50+ paces away-like retracting the antenna on a conventional transmitter
  • Purpose built custom IC chips for key functions; no off-the-shelf IC chips
  • One year limited warranty

INCLUDES: Futaba 10C Transmitter with Module
          NT8S700B 9.6V 700mAh NiCd Transmitter Battery , FUTM1460
          NR4J 600mAh NiCd Receiver Battery, FUTM1280
          FBC-19B RX, TX Wall Charger, FUTM1830
          R6014FS Receiver, FUTL7644
          Switch Harness
          8″ (203mm) Servo Extension
          Neck Strap, FUTM5690

Price: $600

REQUIRES: Servos depending on type of aircraft

SPECS:    Transmitter;
            Power Supply: 9.6V NT8S700B NiCd battery
            Receiving Frequency: 2.4GHz
            Power Requirement: 4.8 – 6V
            Current Drain: 70mA
            Size: 2.06 x 1.48 x 0.63″ (52.3 x 37.5 x 16.0mm)
            Weight: 0.72oz (20.8g)

Updated: July 16, 2015 — 3:51 PM

Leave a Reply

Your email address will not be published. Required fields are marked *

Airage Media © 2016
WordPress Lightbox Plugin