30-1/2″ wingspan, 51″ long, 33-1/2 oz. flying weight. This almost-ready-to-fly jet is very complete, the only additional items you need are a 6-channel transmitter, receiver, and a lithium battery charger that can charge the included 4 cell 2200 mAh flight battery; everything else is included. Some easy assembly is required; you must glue the wings and tail onto the fuselage and install the control horns and pushrods to the pre-installed servos. A set of retracts are included. The main gear must be screwed into the wings and connected to the pre-installed retract servos. The steerable/retractable nose gear is pre-installed. The airplane includes 8 pre-installed servos, a 70mm ducted fan unit with outrunner brushless motor, a 40A speed control, a 4 cell 2200 mAh lipoly battery pack, retractable landing gear and assorted hardware. Assembly takes only a couple of hours. This jet has plenty of power to take off from a smooth surface or runway. The speed range is moderate with very good manners. Difficult to stall, the jet will slow to a crawl and still maintain full control. Great to land, the approach is easy to control and smooth landings are easy to do. For 6 channels: Ailerons (2 servos), Elevator, Rudder, Nose wheel steering, Retracts (3 servos) and Throttle.
Feb 06, 2009 No Comments
About the authorThe author didnt add any Information to his profile yet
No Responses to “Hobby-Lobby F5-E Tiger “Swiss” ARF RC Jet”