The Ultra Micro eXtreme (UMX™) Extra 300 3D BNF makes the dream of a 3D plane you can fly almost anywhere indoors a reality. With a flying weight of barely over an ounce (about 33 grams), battery and all, it is slow and light enough to fly extreme 3D maneuvers in spaces no larger than a dining or conference room.
Its ingenious laser-cut foam airframe, designed by ETOC champ Seth Arnold, uses a fraction of the foam material typically used in profile planes of this type and is covered with micro-thin film. Carbon fiber reinforcement rods keep flexing and twisting to a minimum so you can fly the most aggressive 3D maneuvers with absolute precision.
Best of all, it’s a Bind-N-Fly® aircraft so you can have it up and flying in the time it takes to charge the battery and bind it to your DSM2™ aircraft transmitter.*
Head to E-fliteRC.com right now for complete details and to see it in action.
*A DSM2 aircraft transmitter with adjustable dual rates and exponential is recommended.
Wingspan: 16.8 in (427mm)
Length: 19.4 in (494mm)
Wing Area: 74.0 sq in (4.8 sq dm)
Weight w/battery: 1.20 oz (32.5 g)
Weight w/o battery: 0.98 oz (28.0 g)
Motor: 8.5mm Coreless Brushed (installed)
Receiver/ESC: Spektrum™ AR6400L ultra micro receiver/ESC unit (installed)
Servos: Elevator and Rudder servos integrated on the AR6400L with 2 independent Spektrum AS2000L ultra micro long-throw aileron servos (installed)
Battery: 1S 3.7V 150mAh 12C Li-Po (included)
Charger: 1S DC Li-Po Charger (included)
Item #: EFLU1080
Street Price: $159.99