BP Hobbies F-15 Jet ARF

Jan 11, 2011 No Comments by


















JET PERFORMANCE ON A PROP!!! This is not your ordinary jet model. This version can be prop driven giving you the ability to run a more efficient setup. This strong all wood built ARF is your ticket to a paradise of speed! This kit is for intermediate to advanced pilots. It can be run on electric or glow motors.

The F15 ARF comes with all of the hardware that you need to complete the airplane. Tricycle landing gear, control horns, wheel pants, and a spinner are included. Airframe is expertly covered in Oracover. ARF comes with paper construction manual including CG and control throws.

What you will need to complete this airplane:

  • Transmitter / Receiver: You will need a 4-5 channel receiver, depending on how you power the receiver. If using a y-connector for the BEC, then you can use a 4 channel receiver. If not, use a five channel or higher receiver. Click here – Receivers for our full selection of 2.4GHz Hitec or full range 72MHz receivers
  • Servos – You will need four-5 servos. We recommend either HS-485HB Servo (33485S) Hitec/JR or HS-325HB Heavy Duty Ball Bearing Servo (33325S)
  • Power System – You need a 500 Watt electric motor running a 10 inch propeller. We recommend our BP A2820-6 Brushless Outrunner Motor running a APC 10 x 5 Thin Electric Gray Composite Propeller (LP10050E) using a BP 60A Brushless ESC
  • Battery – Use a 14.8V Lipo with 3300mAh. We recommend the PolyQuest XP Lithium Polymer 14.8V 3300mAh 25C
  • To power the receiver and servos, you should use a separate Battery Eliminator Circuit that produces 4.8-5 Volts. We have several products that will work great with this airplane – Battery Eliminator Circuits
  • Servo Extensions – You will need one 6 inch “Y” connector if using a BEC. We offer servo extension wire with either the Futaba Style Connector/Color Wire or Hitec / JR Style Connector/Color Wire
  • Adhesives – You will need thin and medium CA glue and 5 minute epoxy. These products can be found here Epoxy and CA Glues
  • Price: $117.00

    About the author

    Executive editor About me: I’m a publishing professional who has a passion for aviation and RC, and I love creating issues, books and a website that help RC pilots to enjoy this sport even more. I admire scale aircraft and enjoy the convenience of flying smaller electrics.
    No Responses to “BP Hobbies F-15 Jet ARF”
    Copyright © 2015 Air Age Media. All rights reserved.