Alien Aircraft Extra 300 — Build-Along Part 2

Jan 24, 2012 1 Comment by

This online build-along of the new Alien Aircraft Extra 300 is brought to us from the workbench of MAN contributor Robert Labriola of the Central Connecticut RC Club. Robert is a great builder and is taking the time to show how this great flying, easy to build laser cut airplane kit goes together.

Here’s what Bob has to say: Following my build last year of the Alien Aircraft Gee Bee Sport, I was ready for something with a little more performance. The new Extra 300 has the same great lightweight construction as the Gee Bee and promises to to be an awesome flyer. Here’s the latest photos.

Fuselage and wing  assembled to check fit.

Simple, straightforward design makes building and later covering it very easy. The slot-n-tab construction makes keeping the parts straight and properly aligned very easy. Thin and medium CA glue used throughout.

The plastic parts are vacuum formed ABS and they go together nicely. I used Testors plastic glue and some filler to smooth the seams before shooting on some primer.

After sanding the filler and primer coat smooth, the cowling looks great.

Starting to look like an airplane!

in my next installment I’ll show the motor and power system and servo installation and then I’ll get on with the covering! A great winter build even if you haven’t build a kit before.

Part one for the build-along starts here:


Featured News, Workshop Build-Alongs

About the author

Senior Technical Editor About Me: I have a lifelong passion for all things scale, and I love to design, build and fly scale RC airplanes. With 20 plus years as part of the Air Age family of magazines, I love producing Model Airplane News and Electric Flight.

One Response to “Alien Aircraft Extra 300 — Build-Along Part 2”

  1. Alien Aircraft Extra 300 — Online Build-along – Model Airplane News | Model Aircraft says:

    [...] For the last Part of the build-along click the link here: [...]

Copyright © 2015 Air Age Media. All rights reserved.