Hot Wire Foam Factory Styroplast

Feb 21, 2012 No Comments by

Hot Wire Foam Factory recently introduced their new Styroplast two-part coating for all foams.  When mixed you have about 12-15 minutes of working time and when cured the coating becomes fire-proof, water-proof, and hardens to protect all foam surfaces without adding a lot of weight to the foam.  The possibilities for use are extensive and Styroplast can be applied with a brush, trowel or sprayed.  For anyone that hot wire cuts foam, the finish can be greatly improved with a coating of Styroplast that can be sanded and painted to a beautiful finish.  $29/quart

http://hotwirefoamfactory.com/-024-QT-Styroplast-Quart.html

David Vaught, Editors Blogs, Uncategorized

About the author

A frequent contributor to Model Airplane News and Electric Flight, Dr. Dave is a true RC enthusiast with over 40 years of flying experiences as well as a private pilot license. He flies and writes about everything from ornithopters to giant-scale aircraft, building and flying an average of 20 planes a year.
No Responses to “Hot Wire Foam Factory Styroplast”
Copyright © 2014 Air Age Media. All rights reserved.