Tips & Tricks: Keeping The Arm Safe Close [July 2012]

Jun 01, 2012 1 Comment by

Keeping The Arm Safe Close: I am a big fan of the Arm Safe from Sharp RC.  I used waxed nylon thread to overcome my problem of leaving the arming plug at home.  I make the attachment using a square knot and securing it to the arming plug, reinforcing it with a couple of drops of thin CA.  The other end wraps around one of the screws securing the other metal ring to the plastic base of the body.  Now it is always present for duty when I go to fly.

John Fleming – Nampa ID

For more Tips & Tricks check out page 18 of May’s issue of Model Airplane News.  Remember if you have any of your own Tips & Tricks of your own, you can send it to us to be featured in the magazine. Send a rough sketch and a brief description to

Model Airplane News

C/O Air Age Media

88 Danbury Road

Wilton, CT 06897 USA

Align RC USA, Featured News

About the author

The author didnt add any Information to his profile yet

One Response to “Tips & Tricks: Keeping The Arm Safe Close [July 2012]”

  1. crispin church says:

    i use a deans female with wire soldered a cross the tabs and thats on my keys that i have clipped to my belt and keep the male deans plug untill required another way not to loose it and you dont need a plug for each plane

Copyright © Air Age Media. All rights reserved.