ArmSafe: now with a white (or black) base

Jul 11, 2012 No Comments by

The ArmSafe® Arming Base includes the parts for installing the Base into one RC model. The user supplies the wire and shrink tubing as required. The base is very compact, it measures only 1.0″ diameter x 0.55″ deep, making it very easy to install into most RC models.

The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:
1. High Current Rating
2. Small Size
3. Proven Connector Reliability
4. Easy to Install
5. Easy to Use

This Package Includes the following:
1 – Base Bracket
1 – Deans® Female Ultra Plug®
1 – Nut Ring
3 – Mounting Screws (Pan Head 2-56 x 1/2 Lg)
2 – Set Screws (Sharp Point 4-40 x 3/16 Lg)

 

Description for: AS1-P – PLUG:

 

Spare ArmSafe® Arming Plugs. Always make sure that ALL is safe before plugging in the Arming Plug. An Arming Plug is required to energize a RC Model by plugging it into the ArmSafe® Base. The Arming Plugs are very compact and aerodynamic, when plugged in they only measure about 0.28″ x 0.5″ x 0.5″.

The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:
1. High Current Rating
2. Small Size
3. Proven Connector Reliability
4. Easy to Install
5. Easy to Use

This Package Includes the following:
1 – Arming Plug

 

 

Description for: AS1-K14 – KIT with 14AWG:

 

This is a complete ArmSafe® Kit with 14AWG wire.

 

This Kit is rated for up to 50Amps continuous and 75Amps Burst.  BUT these amperage limits are only a guide to help size ArmSafe® for your RC models.  You MUST test all installations at FULL load conditions to make sure that the wire and connectors do not get hot.  These amperage guides are rated with 10mph x 80degF air flow for eight minutes, with burst ratings for 5 seconds provided the average current (including the bursts) does not exceed the Max Continuous amperage rating.  Many factors will affect the amperage carrying capacity of wire, connectors, and wire harness assemblies such as; wire lengths, air temperature, amount of air movement, quality of the solder joints, wire quality, connector quality, and how long the current flows through the wire.

 

The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:
1. High Current Rating
2. Small Size
3. Proven Connector Reliability
4. Easy to Install
5. Easy to Use

This Kit include everything needed for one complete arming system:
1 – (AS1-B Arming Base)
1 – (AS1-P Arming Plug)
1 – 18” of High Flex Silicone Wire x 14AWG
1 – Shrink Tubing for 4 Solder Joints

 

 

Description for: AS1-K12 – KIT with 12AWG:

 

This is a complete ArmSafe® Kit with 12AWG wire.

 

This Kit is rated for up to 80Amps continuous and 120Amps Burst.  BUT these amperage limits are only a guide to help size ArmSafe® for your RC models.  You MUST test all installations at FULL load conditions to make sure that the wire and connectors do not get hot.  These amperage guides are rated with 10mph x 80degF air flow for eight minutes, with burst ratings for 5 seconds provided the average current (including the bursts) does not exceed the Max Continuous amperage rating.  Many factors will affect the amperage carrying capacity of wire, connectors, and wire harness assemblies such as; wire lengths, air temperature, amount of air movement, quality of the solder joints, wire quality, connector quality, and how long the current flows through the wire.

 

The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:
1. High Current Rating
2. Small Size
3. Proven Connector Reliability
4. Easy to Install
5. Easy to Use

This Kit include everything needed for one complete arming system:
1 – (AS1-B Arming Base)
1 – (AS1-P Arming Plug)
1 – 18” of High Flex Silicone Wire x 12AWG
1 – Shrink Tubing for 4 Solder Joints

 

 

 

 

 

Description for: AS1-K10 – KIT with 10AWG:

 

This is a complete ArmSafe® Kit with 10AWG wire.

 

This Kit is rated for up to 100Amps continuous and 150Amps Burst.  BUT these amperage limits are only a guide to help size ArmSafe® for your RC models.  You MUST test all installations at FULL load conditions to make sure that the wire and connectors do not get hot.  These amperage guides are rated with 10mph x 80degF air flow for eight minutes, with burst ratings for 5 seconds provided the average current (including the bursts) does not exceed the Max Continuous amperage rating.  Many factors will affect the amperage carrying capacity of wire, connectors, and wire harness assemblies such as; wire lengths, air temperature, amount of air movement, quality of the solder joints, wire quality, connector quality, and how long the current flows through the wire.

 

The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:
1. High Current Rating
2. Small Size
3. Proven Connector Reliability
4. Easy to Install
5. Easy to Use

This Kit include everything needed for one complete arming system:
1 – (AS1-B Arming Base)
1 – (AS1-P Arming Plug)
1 – 18” of High Flex Silicone Wire x 10AWG
1 – Shrink Tubing for 4 Solder Joints

 

 

 

Electrics

About the author

Executive editor About me: I’m a publishing professional who has a passion for aviation and RC, and I love creating issues, books and a website that help RC pilots to enjoy this sport even more. I admire scale aircraft and enjoy the convenience of flying smaller electrics.
No Responses to “ArmSafe: now with a white (or black) base”
Copyright © 2014 Air Age Media. All rights reserved.