Sneak Peek — HyperBipe from Durafly

Dec 18, 2013 1 Comment by

Just test flown for a future review in MAN, is the new Aerobatic HyperBipe from Durafly. Available from Hobby King, this sleek aerobatic multi-wing model is a PNF (Plug and Fly) design and has quick and easy assembly, pre-installed 3S power system including motor and ESC, and Fully hinged surfaces. It features rugged molded EPO foam construction and easy access to the motor, servos and power system with two molded, quick release hatches. Includes all hardware and Instructions and assembly takes about an hour.

HyperBipe from Durafly

Wingspan: 34 inches
Length: 34 inches
Motor: 2212 1400kv brushless outrunner
ESC: 30A w/BEC
Servos: 4 x 9g micro servos
Prop Size: 9 x 5

HyperBipe from Durafly

Requires: Your own 4CH transmitter/receiver and a 800~1300mAh 3S lipo battery pack.

HyperBipe from Durafly

Watch for John Kauk’s detailed review in an upcoming issue of MAN.

Video from Durafly.

Featured News, Gerry Yarrish

About the author

Senior Technical Editor About Me: I have a lifelong passion for all things scale, and I love to design, build and fly scale RC airplanes. With 20 plus years as part of the Air Age family of magazines, I love producing Model Airplane News and Electric Flight.

One Response to “Sneak Peek — HyperBipe from Durafly”

  1. jeb says:

    Damn that trim is ugly!

Copyright © 2015 Air Age Media. All rights reserved.