Hyperion 900x250
Log In
Access Premium Site»
Not a member? Join today!

HobbyKing Angel F3A Pattern Plane EPO 1150mm (PNF)

HobbyKing Angel F3A Pattern Plane EPO 1150mm (PNF)

Become the ace of your local flying field with the Angel F3A. This plug and fly EPO foam model builds quickly, is smooth and predictable, making it a wonderful aerobatic model. Practice precision flying with this low cost model before you move on to larger more expensive models. Its good looks and ease of building are only rivalled by its excellent handling characteristics.

Requiring no glue to assemble, the all EPO airframe simply bolts together. The multi-color decals come pre-applied saving you time and trouble. Accessing the receiver and battery is easy thanks to the large magnetically secured hatch. Should you need to access the motor, the molded plastic cowl removes quickly and easily. Rugged wire landing gear, light weight foam wheels and molded wheel pants round out the Angel F3A. Due to the low parts count and no glue design, the Angel can be assembled and ready to fly in around 60 minutes.

Flying the Angel is a treat. The long tail, combined with light wing loading and ample power gives you a stable, predicable flying model. Take off requires little to no rudder input. Rolls are crisp and precise. With plenty of power on tap, the Angel will loop from here to the moon. The large propeller provides ample braking action in the downlines to avoid over speeding. If you like doing knife edges, the Angel is where its at. No roll or pitch coupling here. Just apply a touch of rudder, control the throttle to your pleasing, and the Angel will knife edge until the cows come home. Finally, when the time comes, throttle back, and the Angel settles in nicely.

Features:

  • Plug and Fly – Install receiver, complete final assembly charge batteries and fly
  • Fully molded EPO airframe
  • Magnetically secured canopy/battery hatch
  • No glue required, all bolt together construction

Specs:

Wingspan: 1150mm
Length: 1260mm
Weight: 1630g
Servos: 17g servos x 4
Motor: 3642 KV750 Brushless Out runner
ESC: 60amp Brushless Speed Controller

Required:

  • 4S 14.8V 2200~2600mAh 30C LiPo Battery
  • 4 Channel Transmitter and Receiver

#160000002 –   $137.85

Updated: July 20, 2015 — 12:20 PM

Leave a Reply

Your email address will not be published. Required fields are marked *

Airage Media © 2016
WordPress Lightbox Plugin