Hobbico Rise Vusion 900x250 v2
Log In
Access Premium Site»
Not a member? Join today!

Microaces Aero SE5a ‘Schweinhund’ Kit

Microaces Aero SE5a ‘Schweinhund’ Kit

Microaces Aero SE5a 'Schweinhund' Kit (2) Microaces Aero SE5a 'Schweinhund' Kit (5) Microaces Aero SE5a 'Schweinhund' Kit (4)

From Microaces:

The Microaces Aero SE5a is designed from the ground up and is possibly the most detailed and realistic microscale aircraft of its type. The airframe is designed to take most ultra micro RC equipment found in similar sized RTF aircraft. Double sided printing directly onto foam ensures a light, low wing load aircraft with lots of character and predictable flight characteristics.

History in the Making

Our love of aviation history ensures that the aircraft we choose to reproduce as kits not only look fantastic on static display and in the air, but they also carry a depth of history that can be explored. The Royal Aircraft Factory SE5a was an all round fighter that was much admired by those that flew it. And, due to its performance at altitude, was a worthy adversary of the Fokker DVII when it reached the front in 1918.

Specification:

Aero SE5a Model

Airframe: Scale
Controls: Rudder, Elevator, Throttle
Length: 292mm / 11.5″
Wingspan: 368mm / 14.5″
Wing Area: 5.00 sq dm / 77.5 sq in.
Flying Weight.*: 36.5g/1.3oz
Wing Load: 7.30g/sq.dm / 2.39oz/sq.ft.
Recommended Receiver: Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410
(N.B. Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Rec. Motor / G.Box: Parkzone PKZ3624 (P-51 Motor/Gearbox)
Rec. Prop: GWS 4040, GWS 4530
Skill Level – Build: Intermediate
Skill Level – Pilot: Beginner
Tools required: Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers
Rec. Adhesive: UHU por / Foam safe CA / Aliphatic glue

Kit Content

SHEET PARTS: 2mm laser cut Depron Airframe sheet, 1mm printed & laser cut Depron fuselage sheet, 1mm printed & laser cut Depron flight surfaces sheet, 200 micron printed & laser cut polypropylene sheet, polyester sticker sheet

LOOSE PARTS:

  • 0.8mm laser cut plywood motor mount
  • Two 30mm Ø neoprene rubber tires
  • Six 3mm Ø noedymium magnets
  • 50mm x 4mm Ø plastic tube
  • 1mm x 0.4mm carbon fibre strip
  • 1mm Ø carbon fibre rod
  • pre-shaped piano wire elevator & rudder control rods

£39.99
Visit Microaces.MyShopify.com
See more posts about Microaces

Microaces Aero SE5a 'Schweinhund' Kit (8) Microaces Aero SE5a 'Schweinhund' Kit (7) Microaces Aero SE5a 'Schweinhund' Kit (6) Microaces Aero SE5a 'Schweinhund' Kit (3) Microaces Aero SE5a 'Schweinhund' Kit (1)
Man_newsletter-button_WEB_FINAL

Updated: July 17, 2016 — 10:07 PM

2 Comments

Add a Comment
  1. El kit viene sólo el modelo? Donde se puede comprar el equipo r/c para equipar este modelo?

  2. Yes this is a kit only so you would need to buy the electronics, etc. from your local hobby shop or an online retailer.

Leave a Reply

Your email address will not be published. Required fields are marked *

Airage Media © 2017
WordPress Lightbox Plugin