Author Posts

Fast Foam-Wing Fixes

Jan 21, 2015 6 Comments by

Let’s face it! Accidents happen and when it comes to flying RC airplanes, the chances are sooner or later, you’re going to damage your airplane. There’s no reason to trash your crash. With today’s beautifully molded and great flying foam flyers, you can get back into the air with very little effort. You also can [...]

Gerry Yarrish Read more

Full Spectrum Laser Cutter Review — Home Photo Shoot/Sneak Peek

Jan 20, 2015 No Comments by

Ever want to get a laser cutter for your workshop? We spent part of the day working at home today. Our staff photographer Peter Hall came over to shoot photos for our upcoming MAN review of my Full Spectrum Laser LLC Laser Cutter & Engraver. We are working on a no-nonsense, easy to understand review of [...]

Featured News, Gerry Yarrish, Online Exclusives Read more

Quick & Easy Landing Gear Repair

Jan 20, 2015 6 Comments by

Damaged landing gear caused by landing off-field is probably the single most common repair needed during an RC model’s lifespan. While flying a 30cc Ultimate biplane from Aeroworks, an engine out on the downwind gave us a bad case of landing gear down.    Test Pilot and MAN contributor Aaron Ham was doing an inverted pass [...]

How-tos Read more

Magnetic Cowl Attachment, Workshop Build-Along, Sopwith Camel Part-19

Jan 19, 2015 6 Comments by

Recently, I found out that home repair stores like Home Depot stock in their hardware section Rare-earth magnets ideal for use as engine cowling attachment devices. They come in all sorts of sizes and types and for my ongoing workshop build-along for the Sopwith Camel, I used 1/4 inch and .47 inch diameter x 1/8 [...]

Featured News, Gerry Yarrish, Scale, Workshop Build-Alongs Read more

current pix

Jan 16, 2015 No Comments by
Uncategorized Read more

Parkzone F4U Corsair with SAFE Technology — Sneak Peek!

Jan 14, 2015 No Comments by

We just test flew this new backyard F4U Corsair warbird and we came away very impressed. Available from ParkZone it comes with everything you need to fly it using your own DSM2/DSMX compatible transmitter is included. With its built in SAFE Technology you can select 3 flight modes with varying degrees of flight stability. And, it is so stable [...]

Featured News, Gerry Yarrish, Scale Read more

Giant-scale Fuel Tank Installation – Workshop Build-along Sopwith Camel Part 18

Jan 09, 2015 9 Comments

So buttoning up the last bit of work on my Sopwith Camel, I installed the fuel tank and worked out the fuel line routing. I installed a 20 oz. tank from JL Products. This tank is great as it has no flexible internal clunk line to worry about. It has a rotary pickup design and [...]

Read more

Radio and Control Linkage Installation — Workshop Build-Along Sopwith Camel Part 17

Jan 08, 2015 No Comments

After finishing up my landing gear and the hinging of the tail surfaces, the next part of this build-along project is the radio gear and the control linkages. Starting at the front, I installed the engine and then the servos so I could work out the throttle linkage. Here the engine is bolted onto the firewall [...]

Read more
Copyright © 2015 Air Age Media. All rights reserved.