John Glezellis

Let’s Talk Fuel Lines!

Aug 23, 2011 2 Comments

On all of my nitro and gasoline-powered airplanes, I use zip ties to secure my fuel lines going from the fuel tank to both the carburetor and the muffler. When routing lines within your airplane, make sure that they can move freely and are not bent in any odd fashion. After all, you need to [...]

Read more

The Need for Tail Bracing

Jun 02, 2011 No Comments

Some aircraft have built-up tail surfaces, which need tail bracing wire. The AMR 42% Super Decathlon shown in the photo, has a built up tail like the full-scale Super Decathlon, and tail bracing is needed! First, check with the instruction manual of your aircraft if tail bracing is needed. Otherwise, if you feel that there [...]

Read more

Ignition and Electrical Component Safety!

Jun 02, 2011 3 Comments

When I build an airplane, I always spend extra time to ensure that all internal components are installed properly and well-secured, whether I am building a .25-size glow-powered model, or a 170cc giant-scale aerobat! This time, we will take a look at my ignition installation on my 2.6m Composite-ARF Edge 540. This is an all-composite [...]

Read more

Linkage Safety

May 23, 2011 No Comments

Now, let’s talk about proper linkage setup. Many advanced airplanes take advantage of ball-links to attach given pushrods to a servo arm, control horn, etc. Using ball-links in these areas guarantees to improve linkage geometry and allows a given surface to move freely.  While using a clevis works if servo and linkage geometry are correct, [...]

Read more

Control Surface Deflection Accuracy

May 16, 2011 No Comments

In my 22 years of flying radio-control airplanes, I have learned that time must be taken when both building and setting up your aircraft. For example, let’s talk about control surface deflections. Over the years, I’ve seen some cases at the flying field where pilots simply “eyeball” various control rates and often blame their aircraft [...]

Read more

Safety First: Electric Airplanes

May 09, 2011 No Comments

Safety First: Electric Airplanes Nowadays, it is quite common to see many different electric airplanes at the local flying field, and with their increase in popularity, I would like to discuss safety. On my electric powered models, I use a feature called “Throttle Cut”. With the flip of a switch, the motor can become deactivated. [...]

Read more

Redundant Systems

Apr 19, 2011 No Comments

As my opening blog, I would like to take a brief moment to introduce myself as well as talk about a recent event that I am preparing for. It is my goal to provide insight in either a flight or building tip. Anyhow, let’s begin!  First off, I have been flying remote-control aircraft for the [...]

Read more
Copyright © 2015 Air Age Media. All rights reserved.