Log In
Access Premium Site»
Not a member? Join today!

John Reid

Hangar 9 Christen Eagle

Hangar 9 Christen Eagle

Aerobatic biplanes are always a favorite of any pilot, and the bright color scheme of the Christen Eagle puts it right up at the top of favorite planes.  The new Christen Eagle from Hangar 9 is sure to be winner.  This great looking color scheme is already done up and add to that, a quick […]
Behind the Scenes: How speed controllers are made

Behind the Scenes: How speed controllers are made

Recently I got to take a tour through the Castle Creations factory in Olathe, KS.  I really enjoyed my visit there and I found that making speed controls was a much bigger production than I had imagined.  In this video Lee Estingoy takes us through the assembly line at the Castle factory to see how […]
FPV/Photodrone 600x120
Can you tell which one is the pilot?

Can you tell which one is the pilot?

Here is a great photo of a plane that was hung up on a wire. I think the person in the back is the rescuer worker and the person in front is the pilot, but I could be wrong.  Does anyone want to take a guess, or even better, does anyone know the story behind this photo.
Great Planes Shoestring, the classic pylon racer

Great Planes Shoestring, the classic pylon racer

Race planes have to be some of the coolest looking aircraft around.  Very few have as much history as the Shoestring racer.  If you ever want to try out a pylon racer, Great planes offer a nice looking Shoestring that is sure to please.   Check out what John Reid and Michael York have to […]
Super Taiji by World Models, flight and interview video

Super Taiji by World Models, flight and interview video

Pattern plane are something that is usually on pilot’s wish list.  If one is on your list, you will want to check out this Super Taiji by World Models. This pattern plane is small enough to fit in just about any car but still performs in the air like a much larger aircraft.  The Taiji […]
VQ-GLB Giant Stick 120/23cc flight and interview video

VQ-GLB Giant Stick 120/23cc flight and interview video

We all know that bigger flies better and one of the best smaller flying planes has to be the stick, so….VQ Models introduced their new GLB Giant Stick which is a 1.20 glow or a 20-23cc gas size plane.  This stick has a 78-inch wingspan and is just about 46-inches long.  The two-piece wing makes […]
Hangar 9 P-47D Thunderbolt 30cc flight video

Hangar 9 P-47D Thunderbolt 30cc flight video

Here it is the Hangar 9 P-47D Thunderbolt 30cc ARF flight and interview video.  This plane offers a lot of scale detail and assembles very fast. This build included the optional air retracts (including tailwheel) from Robart, the optional cockpit kit from Hangar 9 and the Evolution 40GX gas engine.  The key parts of the […]
Exclusive Review! Hangar 9 P-47D 30cc

Exclusive Review! Hangar 9 P-47D 30cc

Here it is the Hangar 9 P-47D Thunderbolt 30cc ARF completed and ready for photos in 6 days, from start to finish.  This build included the optional air retracts (including tailwheel) from Robart, the optional cockpit kit from Hangar 9 and the Evolution 40GX gas engine.  The assembly went along very well due to the […]
Hangar 9 P-47 Build (assembly) day 5

Hangar 9 P-47 Build (assembly) day 5

Here is the video of the fifth day of assemble on the Hangar 9 P-47 Thunder Bolt.  I finished up with the gas tank and then I moved on to the cowl installation and this took the most time of anything because I can’t take the cut back, so I proceeded slowly.  I got the retracts all […]
Hangar 9 P-47 Build (assembly) day 4

Hangar 9 P-47 Build (assembly) day 4

Here is the video of the fourth day of assemble on the Hangar 9 P-47 Thunder Bolt.  I finished installing the engine and the stabilizers.   I also installed the tank and routed the fuel lines to the fill valve and vent valve on the bottom of the fuselage . There are some images below the video.  More […]
Hangar 9 P-47 Build (assembly) day 3

Hangar 9 P-47 Build (assembly) day 3

Here is the video of the third day of assemble on the Hangar 9 P-47 Thunder Bolt.  I finished installing all of the control surfaces and moving on to the engine.  So far the construction is moving along well and the part fit had been outstanding.  The manual is very complete and explains everything well.   Anyone, with […]
Tail wheel in the down and locked position.

Hangar 9 P-47 Build (assembly) day 2

Here is the video of the second day of assemble of the Hangar 9 P-47 Thunder Bolt.  I finished the flap assembly and move on to the retracts. This is very little modification needed to install the Robart retracts and this moves along much quicker than many other retract installations.  This plane will have an […]
Airage Media © 2016
WordPress Lightbox Plugin
click me