Coming up on the conclusion of our exclusive, Build-Along series on the ArrowMaster biplane from Alien Aircraft, Model Airplane News contributor Rick Bell add the finishing details to the airplane making it just about ready to finish and cover. Here’s what Rick has to say so far. Ahh, there’s nothing like a model assembled without the [...]
Air filled model airplane tires are not steel belted or as rigid as automobile tires and can easily be over-inflated. They are durable and can provide many landings and years of use if you take basic care of them. To inflate, acquire a small sports ball (basketball/football) hand pump (do not use a compressor or [...]
This past weekend was the NEAT Fair (Northeast Electric Aircraft Technology Fair) and as usual, electric airplane lovers from all across the country made their annual trek to Downsville, NY to partake in this E-Power Extravaganza. The MAN Team was on hand and we captured some of the action that drew center-stage on the flightline. One [...]
And of course, there were the full size airplanes performing over the same flightline that the RC airplanes were operating off of. A well known name in both RC and world class full-size aerobatics is Matt Chapman with his impressive CAP 580. And joining Matt this year was Dan Marcotte with the classic Ultimate Biplane!
This Airshow hosted at the Sanford Seacoast Regional Airport is an amazing Turbine Jet Meet with lots to offer. Put together by Ray Labonte and sponsored by Horizon Hobby, this meet is like World’s Fair for the RC hobby. Not only are turbine jets flown all day, but the airport is divided up with several flight areas. [...]
As we pack up to head to the US Air Meet sponsored by Horizon Hobby and hosted at the Seacoast Regional Airport in Sanford, ME., we getting excited to see all the great RC and full-size airshow planes. One of our good friends who’ll be at the airshow, pilots both RC and full-size aerobatic planes and [...]
Now that most of the fuselage construction has been completed, it’s time to tackle the nose section of the ArrowMaster. This is accomplished by using several pieces of 1/4 inch thick balsa glued between the firewall and the model’s spinner backplate. This is a tried and true modeling technique that works very well and makes for [...]