E-flite 5-Amp Pro Brushless ESC

Model Airplane News - RC Airplane News | E-flite 5-Amp Pro Brushless ESC

Model Airplane News - RC Airplane News | E-flite 5-Amp Pro Brushless ESC

The E-flite® 5-Amp Pro Brushless ESC has been designed for use in radio control aircraft and to support continuous currents of up to 5 amps when using 2 Li-Po battery packs and up to four sub-micro servos. Standard features include advance BEC and safe power arming along with programmable features such as low voltage cutoff, braking, timing and throttle input range.

Key Features

  • Up to 5 amps continuous current with proper air flow
  • Drives up to 4 sub-micro servos on 2S
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 2-cell Li-Po or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Soft start
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
  • Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads

EFLA1005 –  $26.99

Updated: July 16, 2015 — 9:51 AM
Air Age Media ©
WordPress Lightbox