Almost ready to fly ElectriFly Matt Champman Eagle 580 Aerobatic Airplane.
This 50″ class Edge 540T is part of the ElectriFly E-Performance XLC Extreme Light Concept.
FEATURES: Construction: Balsa and ply with airfoiled control surfaces, motor
box preinstalled with blind nuts providing perfect spacing for
spinner backplate-no need for measuring, cowl ring also
preinstalled
Wings: Two piece with carbon fiber wing joiner
Covering: Top Flite MonoKote
Aileron Control: Dual servo
Cowl: Prepainted fiberglass
Canopy: Single, one-piece provides access to battery compartment and
attaches with magnets
Wheel Pants: Prepainted fiberglass
Landing Gear: Prepainted fiberglass
Wheels: Main-two foam –” (–mm) diameter, tailwheel –” (–mm)
diameter
Decals: Die-cut, Embry-Riddle Eagle 580 color scheme
Spinner: Plastic, blue in color –” (–mm) diameter
Hardware: Full set included
Building Time: Approximately 6-8 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
date of purchase.
INCLUDES: ElectriFly ARF Matt Chapman Eagle 580 Airplane with fiberglass cowl,
wheel pants and landing gear, wheels, hardware and photo-
illustrated instruction manual
REQUIRES: Radio: 4-channel
Servos: 4-micro
Y Harness: For aileron servos
45A ESC for Brushless Motor: GPMM1840
Battery: LiPo 2100mAh, GPMP0618
Cell Balancer: For LiPo battery, GPMM3160
Battery Charger: LiPo compatible
Propeller:
SPECS: Wingspan: 50″ (1270mm)
Wing Area: 494 sq in (31.9 sq dm)
Weight: 3.25 – 3.5lb (1470 – 1590g)
Airfoil: Fully symmetrical, low wing placement
Wing Loading: 15 – 16oz/sq ft (46 –
49g/sq dm)
Length: 47.75″ (1215mm)
Center of Gravity: –” (–mm) back from the leading edge of the
wing at the side of the fuselage