30-1/2″ wingspan, 51″ long, 33-1/2 oz. flying weight. This almost-ready-to-fly jet is very complete, the only additional items you need are a 6-channel transmitter, receiver, and a lithium battery charger that can charge the included 4 cell 2200 mAh flight battery; everything else is included. Some easy assembly is required; you must glue the wings and tail onto the fuselage and install the control horns and pushrods to the pre-installed servos. A set of retracts are included. The main gear must be screwed into the wings and connected to the pre-installed retract servos. The steerable/retractable nose gear is pre-installed. The airplane includes 8 pre-installed servos, a 70mm ducted fan unit with outrunner brushless motor, a 40A speed control, a 4 cell 2200 mAh lipoly battery pack, retractable landing gear and assorted hardware. Assembly takes only a couple of hours. This jet has plenty of power to take off from a smooth surface or runway. The speed range is moderate with very good manners. Difficult to stall, the jet will slow to a crawl and still maintain full control. Great to land, the approach is easy to control and smooth landings are easy to do. For 6 channels: Ailerons (2 servos), Elevator, Rudder, Nose wheel steering, Retracts (3 servos) and Throttle.
