The Nexus 900 is a molded, high performance, micro sized slope glider, loosely based on the outline of a full scale glider. This model is a great model to take with you on a slope and hiking adventure as the whole model breaks down to fit in a very small space. The model when completed can be carried in the small box it comes in! The model features full function of rudder, elevator, and aileron control, but the unique thing about the Nexus 900 is that it incorporates “wingeron” function which pivots the entire wing. This gives you both your pitch, and roll authority. Originally designed by Franck Aguerre, the Nexus was intended for high performance.
Arriving almost ready to fly, the fuselage is molded of light weight fiberglass and is painted in the mold. The wings are painted in the mold which gives a very light, smooth, glossy finish. To keep the weight in the tail low, the screw on horizontal stabilizer is made of light weight balsa and is covered in matching white film covering. Just a couple evenings of work are all that is required to get this little model ready to fly. To complete you’ll just need 2~3 servos (optional rudder, though we recommend it), micro receiver, transmitter with elevon mixing, and a small 4.8v NiMh receiver battery, or 2S 7.4V lipo and micro UBEC.
Check out the Nexus 900 for your next slope experience. Small in size, big on fun and performance!
- Almost Ready to Fly – Complete final assembly, install electronics and fly!
- Pre-painted molded fiberglass fuselage
- Painted in the mold wings come out light, strong, with an ultra smooth finish.
- Working wingeron control and rudder
- Bolt on horizontal tail
Wing Span: 936mm
- 3+ Channel transmitter and receiver with elevon mixing
- 3* 4.7g servos
- 4.8V 150mah NiMh receiver battery, or 2S 7.4V Lipoly and micro UBEC
#496000001-0 – $154.66