Origin Models Acro Vectored Thrust 4S EPO ARF 44″

Origin Models Acro Vectored Thrust 4S EPO ARF 44″

This is the Brushless Electric Powered, Radio Controlled Almost Ready to Fly ACRO Vectored Glider from Origin Hobby. This is an aerobatic glider with a vectored motor. Flies as a normal glider, or at high speed with the included motor. Under the control of an experienced pilot it will perform aerobatic maneuvers such as flat spin, rolling, edge flight, hanging vertical landing and more.

Includes:

  • ARF ACRO Vectored Glider
  • Prop
  • Prop Adapter
  • Spinner
  • CG Adjustment
  • Block
  • Instruction Manual

Requirements:

Radio: 6-channel
LiPo Battery: 14.8V at least 2300mAh (if using 5×5 prop)
11.1V at least 2300mAH (if using 6×5 prop)
LiPo Battery Charger: Compatible with selected battery
Adjustable Wrench and Phliips Screwdriver
Field and maintenance equipment

Specifications:

Wingspan: (1120mm)
Length: (940mm)
Wing Area: 16.5 sq dm
Flying Weight: (900-1000g)
Center of Gravity: 2.7″ (70mm) behind the leading edge of the wing at
fuselage sides
Control Throws: Normal Aerobatic
Elevator, Up/Down: 0.39″ (10mm) 0.59″ (15mm)
Rudder, Left/Right: 0.47″ (12mm) 0.98″ (25mm)
Aileron, Up Down: 0.39″ (10mm) 0.59″ (15mm)
Construction: EPO Foam
Motor: 2836 (2450Kv) brushless
Electronic Speed Control: 40A
Spinner: Plastic
Propeller: 6×5
Canopy: Molded plastic construction
Servos: Five

LXFGPK – $174.99

lorga0010

Updated: August 4, 2015 — 9:49 PM
Air Age Media ©
WordPress Lightbox