Flight Journal Veterans day 900x250
Log In
Access Premium Site»
Not a member? Join today!

Freewing BAE Hawk T1A

Titanic Tiger Moth Takes Flight

E-flite PT-17: March Issue

Easy Model Airplane Engine Testing — Keeping it Cheap and Safe!

Make Your Own Fiberglass Parts - Plugs, molds and layups explained

Favorite Workshop Tips

RotorDrone Magazine - Subscribe Now!

Ultimate Responsive Image Slider Plugin Powered By Weblizar

LATEST


RC Model Jet Makeover — Added details for the fast lane

RC Model Jet Makeover — Added details for the fast lane

I’ve been waiting for a F86 Sabre EDF to come along that didn’t have a HUGE “out of scale”nose intake and didn’t cost an arm and a leg. Finally E-flite did it. Watching the performance of this model on the stock setup , I was finally satisfied. Having just finished a repaint, retract install and […]
RC Models, Mastering the Lomcevak– Perfecting the classic aerobatic maneuver

RC Models, Mastering the Lomcevak– Perfecting the classic aerobatic maneuver

As aerobatic RC pilots develop their skills, it’s natural to try different control inputs while flying.  And, quite often new aerobatic maneuvers are discovered by pushing the envelope. The classic Lomcevak is a tumbling maneuver where the aircraft’s tail rotates in front of the engine throughout the maneuver. The maneuver has Eastern European roots and […]
Hobbico RF8 Get Real Giveaway 600x120
RC Model WW1 RC Jamboree — And the Winners are…

RC Model WW1 RC Jamboree — And the Winners are…

If you are a WW1 fan and have been keeping track of the modeling events over the year, then you know that the Old Rhinebeck Aerodrome was again alive with RC action this past weekend. Hosted by the Mid-Hudson R/C Society club, the 51st annual WW1 RC Jamboree enjoyed amazingly nice weather and mild winds […]
PhotoDrone 600x120
58%- RC Scale Akrobat Special

58%- RC Scale Akrobat Special

This 58%-scale model of the Czech aerobat is powered by ZDZ 420cc twin cylinder inline engine and has a wingspan of 14.75 feet. In this video, pilot Zdenek Hulka puts ... Continue reading ... Join our premium membership!
RC Model Tips & Tricks

RC Model Tips & Tricks

The best readers have the best tips! Here are four workshop tips submitted by MAN readers that we think will make your life easier.   LEAD KEEPERS Here’s an easy way to prevent those aileron and flap Y-harness leads from slipping inside the fuselage or wing. When the leads are disconnected from the wings, use the little […]
RC WW1 Jamboree Ready Eindecker — Part 3

RC WW1 Jamboree Ready Eindecker — Part 3

Just in time for the upcoming Old Rhinebeck Aerodrome RC WW1 Jamboree, our .25-size Fokker E-III Eindecker is ready for action. We offered the CAD drawings for this sport mission-ready machine in Part 1 of this series in a downloadable PDF. The prototype highlighted here was build, covered and finished up in only four weekends […]
RC Giant Czech Twin Takes Flight

RC Giant Czech Twin Takes Flight

Here’s a plane we’ve never seen modeled before: a giant-scale version of the Let L-410 Turbolet, a Czechoslovakian twin-engine short-range transport aircraft. With a 128-inch wingspan, the model weighs in at 28.6 pounds and is powered by two Axi 4130/20 motors, two PowerIon 5S 4P LiPo packs and two APC 19×12 propellers. This twin beauty was built and […]
RC Model – Soldering Landing Gear — Old-School Tips for Giant Scale Mains

RC Model – Soldering Landing Gear — Old-School Tips for Giant Scale Mains

When I made my landing gear for my Sopwith Camel project, I did it the old-fashioned way–I cut and bent all the parts from music wire, wrapped the joints with thin copper wire and soldered everything together. So, the first step for producing any wire landing gear is to install the two main verticals onto […]
RC Model Workshop Tips

RC Model Workshop Tips

You asked for ’em, we’ve got ’em! Here are four terrific shop tips you can use this weekend to make your time in the workshop easier and more enjoyable. Don’t forget to send us your favorite tip!   SMOOTH OPERATOR Razor saws are handy for cutting various materials, but their teeth sometimes “snag” the material, […]
RC Prop Balancing Made Easy

RC Prop Balancing Made Easy

I have been often asked, “Do I need to balance my prop?” and the quick answer is always “Yes!” A properly balanced prop will give you more rpm from gas, glow and electric engines. A balanced prop will reduce the wear and tear on your aircraft by greatly reducing vibration, which leads to reducing premature […]
Airage Media © 2018
WordPress Lightbox