From the Magazine

Pilot Projects: Custom Privateer [May 2012]

Apr 06, 2012 No Comments

Custom Privateer: What’s Lew doing in the pool with his model? Check it for leaks, of course! Lew first started building this beauty in 1955, using the Berkley Kit based on Don McGovern’s design.  He completed it in 1975 and added 4-channel control along with an Enya 60 glow engine.  Unfortunately, the plane landed in [...]

Read more

Tips & Tricks: Looking Good [May 2012]

Apr 06, 2012 No Comments

Looking Good: Protect your aircraft’s cover scheme! Before you fuel it up, apply a thin coat of clear dope to the trim surfaces.  This will also keep the trim from coming loose when you clean your aircraft. Chris Miller – Louisville, OH For more Tips & Tricks check out page 14 of May’s issue of [...]

Read more

Pilot Projects: FS-6.66 Flying Saucer [April 2012]

Apr 02, 2012 1 Comment

FS-6.66 Flying Saucer: Designer and builder LaVerne must not mind the spotlight: this unique, 20-pound plane has a wing diameter of 66 inches and is just over 7 feet long! An Exceed Monster 160 motor, Castle Creations Ice 100 speed control, 20×10 APC prop and an 8-cell, 5800mAh LiPi provide the get-up-and-go (LaVerne notes, “Next [...]

Read more

Tips & Tricks: Simple Crush Plate [April 2012]

Apr 02, 2012 No Comments

Simple Crush Plate: Purchase Lucite at the hardware store and pick up a 1 1/4-inch hole cutter.  Use the hold cutter to cut out some Lucite 1 1/4-inch disks. Then use a drill press to cut out a 1/4-inch hole in the center of the disk.  This large Lucite disk can be used with the [...]

Read more

Tips & Tricks: Cheap And Easy Wheel Chocks [March 2012]

Mar 20, 2012 No Comments

Cheap And Easy Wheel Chocks: A quick way to keep your plane in one spot is to use these wheel chocks made from 1/2-inch PVC pipe. You can vary the length of the side pieces to accommodate different sizes of wheels.  Before gluing the final pieces, fill the assembly parts with sand.  You can make [...]

Read more

Review: Hacker Extra 330SC Profile

Mar 20, 2012 No Comments

Hacker Model in concert with Hacker Motors has introduced the Extra 330SC 3D aerobatic EPP foam profile aircraft.  Advertised as “almost unbreakable”, the 330 Extra is a fairly large 3D foamy with a wing span of 39.37” (1000mm) and a fuselage length of 39.76” (1010mm).  The plane is designed for a minimum of 4 channels [...]

Read more

Pilot Projects: Mach 1 [March 2012]

Mar 01, 2012 No Comments

Mach 1: Built from Model Airplane News plans (FSP067330) published in 1973, this pattern ship has foam wings and a stabilizer covered with balsa and finished with epoxy. A Thunder Tiger .60 engine provides more than enough power. Ken writes, “The original plane was designed by Norm Page, a well-known pattern pilot, and the design [...]

Read more

Giant Big Stik Gets a Makeover

Mar 01, 2012 24 Comments

When Rick Michelena decided to turn a common ARF into something special, he started with a Great Planes Giant Big Stik and spent less than a week giving it a facelift. Here’s his story. I needed a good sport airplane, but I still wanted the looks of something different than the run of the mill [...]

Read more
Copyright © 2014 Air Age Media. All rights reserved.