Workshop Build-Alongs


Workshop Build-Along — Sopwith Camel — Part 29: Balancing the CG

Workshop Build-Along — Sopwith Camel — Part 29: Balancing the CG

Well, this is the very last workshop segment from this Sopwith Camel Build-Along. After getting the model balanced, it will all be about how it flies, and that means a trip to the Club’s flying field. To balance the model, I used scuba weight and lead shot installed in the engine compartment. I built a plywood […]
Workshop Build-Along — Sopwith Camel — Part 27: Interplane Struts

Workshop Build-Along — Sopwith Camel — Part 27: Interplane Struts

The last bits of building in any project seem to take the longest, at least when you have a deadline to meet! We are planning to have the compete construction article for this sport scale WW1 classic in the upcoming December issue of MAN in our Scale Special Issue. To make the interplane struts you […]
Build-Along — Sopwith Camel — Update: Engine and Fuel System Check

Build-Along — Sopwith Camel — Update: Engine and Fuel System Check

If you have been following along with this extended Workshop Build-Along series, you know that from the start, I designed the Sopwith Camel around the Zenoah G38 gasoline engine. One of the great advantages of scratch building, is that you can from the start workout everything so you can use the engines and equipment you […]
Fabric Covering Tips – Sopwith Camel Workshop Build-along — Part 20

Fabric Covering Tips – Sopwith Camel Workshop Build-along — Part 20

Now that the Sopwith Camel’s fuselage and the rest of the project has been all buttoned up, and the engine cowling’s magnetic attachment arrangement taken care off, we can how move on to the covering process of the project. For this model, I am using Scale Stits and Polytone paint and adhesive. The fabric is specially produced […]
RC Details, Landing Gear – Sopwith Camel Build-Along Part 16

RC Details, Landing Gear – Sopwith Camel Build-Along Part 16

Over the holidays I got back to my scratch build scale RC Sopwith Camel and finished off some of the details. Here’s some new pix of the landing gear fairings as well as work on the tail surfaces. This build-along is now just about at the point where we will start covering the model and […]
Sopwith Camel Build-Along Part 15 — Fairing the Cabane Struts

Sopwith Camel Build-Along Part 15 — Fairing the Cabane Struts

So after the cabane (and the landing gear), are soldering together, they have to be filled out with wood fairings. To do this on the Camel I bought some 1/2 inch wide grooved basswood stock. These fit nicely on the wire and are a lot easier to use than trying to groove wood yourself on […]
Workshop Build-Along – Part 7 – ArrowMaster Final Assembly

Workshop Build-Along – Part 7 – ArrowMaster Final Assembly

Coming up on the conclusion of our exclusive, Build-Along series on the ArrowMaster biplane from Alien Aircraft, Model Airplane News contributor Rick Bell add the finishing details to the airplane making it just about ready to finish and cover. Here’s what Rick has to say so far. Ahh, there’s nothing like a model assembled without the […]
1 2 3 4 5 6 7
Air Age Media ©
WordPress Lightbox