The Turbo Beaver is a large, light-weight park flyer with good small-field performance. With a 60-inch wingspan, it’s rather large as park flyers go, but it handles beautifully in tight places and performs well on small economical brushless power systems. The wings plug in and are retained by rare earth magnets. A hatch provides access to the radio components and battery, and no tools are required to remove or install it. Guidance is 5-channel RC using six sub-micro servos. Construction is primarily balsa and light-ply with plastic detail parts.
I also offer a laser-cut parts pack and vacuum-formed cowl available from Patscustom-models.com. For the scratch-builder, the plastic cowl, air scoop and spinner will be available and full-size parts templates are provided on the plans.
Read the article here.