E-flite Ultra Micro eXtreme Extra 300

E-flite Ultra Micro eXtreme Extra 300



























The Ultra Micro eXtreme (UMX™) Extra 300 3D BNF makes the dream of a 3D plane you can fly almost anywhere indoors a reality. With a flying weight of barely over an ounce (about 33 grams), battery and all, it is slow and light enough to fly extreme 3D maneuvers in spaces no larger than a dining or conference room.


Its ingenious laser-cut foam airframe, designed by ETOC champ Seth Arnold, uses a fraction of the foam material typically used in profile planes of this type and is covered with micro-thin film. Carbon fiber reinforcement rods keep flexing and twisting to a minimum so you can fly the most aggressive 3D maneuvers with absolute precision.

Best of all, it’s a Bind-N-Fly® aircraft so you can have it up and flying in the time it takes to charge the battery and bind it to your DSM2™ aircraft transmitter.*


Head to E-fliteRC.com right now for complete details and to see it in action.


*A DSM2 aircraft transmitter with adjustable dual rates and exponential is recommended.



Wingspan:       16.8 in (427mm)

Length:            19.4 in (494mm)

Wing Area:      74.0 sq in (4.8 sq dm)

Weight w/battery:    1.20 oz (32.5 g)

Weight w/o battery:    0.98 oz (28.0 g)

Motor: 8.5mm Coreless Brushed (installed)

Receiver/ESC: Spektrum™ AR6400L ultra micro receiver/ESC unit (installed)

Servos: Elevator and Rudder servos integrated on the AR6400L with 2 independent Spektrum AS2000L ultra micro long-throw aileron servos (installed)

Battery: 1S 3.7V 150mAh 12C Li-Po (included)

Charger: 1S DC Li-Po Charger (included)


Item #: EFLU1080

Street Price: $159.99








Updated: July 16, 2015 — 9:49 AM
Air Age Media ©
WordPress Lightbox