Executive Jet

Executive Jet











New from Hobby Lobby:

“Executive Jet” Twin Ducted Fan ARF Business Jet

47″ wingspan, 53-1/4″ long, 370 sq. in. wing area, 47 oz. flying weight. Molded bead foam construction. Fuselage comes with the two 66mm fans pre-installed, ready for the motors and the foam engine nacelles. The wings are reinforced with carbon tubes and have molded recesses for aileron servos; wing tips are made of wood and pre-covered. Molded pockets with plywood mounting blocks for the installation of the landing gear are pre-installed in the wings and accept the included fixed gear or the optional retract gear (SFM3501B).
Fuselage has the mount for the steerable nose gear pre-installed; just screw the fixed steerable gear in place. The ailerons, elevator and rudder are made of balsa and covered with heat-shrink film. They are pre-installed and the hinges are pre-pinned for safety. The fuselage has wooden servo mounts and battery tray pre-installed. Jet accelerates quickly and easily takes off from a smooth surface/runway with a strong climb rate.

For more information, visit RadioControlZone.com!

Updated: May 15, 2008 — 10:00 AM
Air Age Media ©
WordPress Lightbox