eRC Rebel 70 Sport ARF The Rebel 70 was conceived with the sport pilot in mind. You want quality and performance, but you don’t want to overpay for it. eRC is here for you with a great looking jet that is both fun and exhilarating to fly. The Rebel 70 is built from tough EPO foam and comes with the decals pre-applied so you can get right to the assembly. Have your battery charged when you open the box because it will only take 30 minutes or less to get it flight ready. Only two parts need to be glued on, everything else is assembled with screws. It comes with five 9g servos installed, a 70mm fan with a 3000Kv outrunner motor, and a 45A ESC. All you need to provide is a 4S 2200mAH LiPo and a 4 or higher channel receiver. The battery area can accommodate up to a 3300mAH battery with the removal of a plastic tab in the tray. The fixed tricycle landing gear includes nose wheel steering and can be removed to reduce drag for maximum speed. Flights can be mild or wild depending on your control settings. Rolls are crisp and stop right when you tell it to. The rudder is larger than most to enable super slow rolls, point rolls, and knife-edge flight.
Flying Weight: 19.5 oz.
· 70mm ducted fan unit
· 3000Kv outrunner brushless motor
· 45A speed control with BEC and genuine Deans Ultra connector
· Five 9 gram servos
· Removable fixed landing gear with nose wheel steering
· Pre-decorated EPO airframe
· Pilot figure
· Larger Rudder for improved knife-edge flight
· Large battery area for 2200-3300mAh size LiPo packs