JR COLT 2.4GHz Retro Radio System

JR COLT 2.4GHz Retro Radio System

From JR:

Step back to the Future!

Announcing the new JR Colt 6 Channel 2.4GHz Retro System

JR’s COLT takes RC nostalgia to new levels of sophistication, reliability, and ease.

Housed in a vintage “Heathkit” looking all aluminum case, the COLT might look like your basic vintage transmitter, but of course, its looks ARE deceiving.

Just lift the lower cover plate, and you will find a fully capable, 20 model memory, 2.4GHz DMSS fully equipped 6 channel transmitter that will allow you to pilot your prized vintage models with a level of programmability and reliability that was only dreamed of back in the day.

Hand Built, and in limited production, the COLT’s 3 Model Type capability makes it capable of flying your entire fleet of vintage models.

No more searching for an old system and crossing your fingers that it’s still reliable. No more looking for someone to take your new system mechanicals and install it in your vintage case. JR’ COLT DMSS system is Retro, Reliable, and Ready to Go.

So dust off that old Kaos™, Cricket, or Hobie Hawk, and head out to the field with the retro, yet ultra-reliable JR COLT 2.4GHz DMSS system, and take a step back to the future.

COLT: “Classic Old Looking Transmitter”

COLT Features:

  • 6 Channels
  • 20 Model Memory
  • 3 Model Type (Airplane, Heli, Sailplane)
  • Reliable DMSS 2.4GHz
  • All Aluminum Transmitter Case with Retro finish
  • Hinged LCD cover
  • Custom Retro style stick tips
  • Custom Retro style Gimbal Rings
  • Optional TX Battery Choices: Use the standard (included) 1400ma LiFe battery, or upgrade the capacity and flight times with the optional 3200ma pack.
  • 3 Year Warranty


TX Number: NET-M116G
Channels: 6
System Type: Computer
Modulation: 2.4GHz DMSS
TX Power: 1400ma LiFe 6.4v rechargeable battery
AC Charger: NEC-A1530 Included (Input 100v-240v 50/60Hz/ Output DC 15v 30w)


Width: 173.5mm (6.83”)
Height x 165mm (6.49”)
Thickness: 51.5mm (2.02”)
Weight: 910g (2.0 lbs.)  Including 1400ma TX battery
Data Transfer: Capable of transferring model data from most current JR XG Series systems to COLT

*Receiver not included

Personalize your new COLT with this Special Offer

Register your new JR COLT system at www.jramericas.com/regcolt and receive a FREE specially engraved “Hand Built For” plaque to add that final RETRO look to your new system. These plaques are only available to registered COLT owners. Additional field box/transmitter case plaques will also be available separately for an additional charge.

#JRP07432 – MAP $799.99

JR COLT 2.4GHz Retro Radio System


JR COLT 2.4GHz Retro Radio System (1) JR COLT 2.4GHz Retro Radio System (2) JR COLT 2.4GHz Retro Radio System (3)

Updated: December 9, 2015 — 2:23 PM

1 Comment

  1. can you upgrade a PROLINE SINGLE STICK ?

Comments are closed.

Air Age Media ©
WordPress Lightbox