From JR:
The new RG613BX 6-channel XBus receiver is based on the previous RG612BX, but is housed in an impact resistant, clear plastic case for durability.
It’s difficult to pick just ONE reason why the RG613BX is special. One could point to the path diversity antennas that eliminate the need for a separate remote for full-range signal and telemetry data. Perhaps the fact that this small receiver is also XBus capable. Maybe the low power consumption, EZ BIND simplicity and ultimate flexibility are the main selling points.
The RG613BX utilizes JR’s robust DMSS modulation system that combines attribute from both DSSS and FHSS modulation into a wide-band transmission system with high-speed response and high resistance to RF noise. Also unique to DMSS is JR’s Intelligent Output System (IOS), which automatically selects control signals that need to be transmitted simultaneously and delivers the data as one complete signal frame. IOS ensures there is no time delay when commanding servos used for critical functions such as a CCPM swashplate on a helicopter or with an aircraft with multiple servos ganged on a single control surface. This gives a stronger connection in flight and can reduce wear on components, keeping your model flying better, longer.
Not only does this receiver listen, but it talks back as well. DMSS is a bi-directional communication system that delivers real-time telemetry information. Receiver voltage telemetry is standard with every DMSS receiver, and add-on sensors are available to monitor nearly every metric vital to the operation of your mode.
Features:
- Path diversity antennas provide full-range signal and telemetry data without a remote antenna
- 5-channel standard PWM output and single shared XBus or PWM output can be used parallel with one another for additional capability.
- EZ BIND capable- no bind plugs necessary!
- Low power consumption
- Option to add RA02TL remote for additional path diversity in more complex installations.
Specs:
Receiver Voltage Telemetry: Standard
Type: full-range
Channel Count: 6
Modulation: DMSS
Band: 2.4Ghz
Case Type: Hard Plastic
Length: 1.63 in (41.5mm)
Width: 0.80 in (20.5mm)
Height: 0.57 in (14.5mm)
Weight: 0.42oz (12g)
Input Voltage: 4.0–8.5V
Antenna Length: 150mm
JRPR03460 – RG613BX 6CH DMSS XBus Receiver – $84.99 MAP
The new RG812BPX’s 8-channel DMSS receiver not only offers the benefits of a power buss power distribution security, but also features a unique “hybrid port” system that allows all 8 servo ports to be used either as conventional PWM servo ports, or as a direct XBus serial connection, eliminating the need for an XBus connection hub.
Ideal for small gas or large electric airplanes where weight and simplicity are desired, the RG812BPX’s heavy-duty 18 AWG power leads with Dean’s Ultra connector will provide constant voltage even in high-current applications such as extreme 3D flight. As an added layer of safety, the RG812BPX features a built-in soft switch designed to fail ‘on’ so that should the switch fail in flight, power to the receiver will not be interrupted.
The RG812BPX utilizes JR’s robust DMSS modulation system that combines attribute from both DSSS and FHSS modulation into a wide-band transmission system with high-speed response and high resistance to RF noise. Also unique to DMSS is JR’s Intelligent Output System (IOS), which automatically selects control signals that need to be transmitted simultaneously and delivers the data as one complete signal frame. IOS ensures there is no time delay when commanding servos used for critical functions such as a CCPM swashplate on a helicopter or with an aircraft with multiple servos ganged on a single control surface. This gives a stronger connection in flight and can reduce wear on components, keeping your model flying better, longer.
Not only does this receiver listen, but it talks back as well. DMSS is a bi-directional communication system that delivers real-time telemetry information. Receiver voltage telemetry is standard with every DMSS receiver, and add-on sensors are available to monitor nearly every metric vital to the operation of your mode.
Features:
- Heavy duty power input leads with Dean’s Ultra connector provide constant voltage to the
- servos in power-hungry, high-current demand setups
- JR’s patented Intelligent Output System (IOS) which sends data from all channels as one
- complete signal frame, eliminating lag.
- Supports real-time telemetry data
- Cross-modulation restricted; robust DMSS link is highly resistant to noise from FHSS or
- DSSS modulation transmitters and other RF noise
- Failsafe support on all channels
- Status condition LEDs
- Compact, lightweight (30g) design
Specs:
Receiver Voltage Telemetry: Standard
Type:Full-range receiver
Channel Count:8
Modulation:DMSS (Dual
Modulation Spread Spectrum)
Band:2.4GHz
Case Type:Hard plastic
Length:1.67 in (42.5mm)
Width:1.22 in (31.0mm)
Height:0.55 in (14.0mm)
Weight: .84 oz (24 g)
Voltage Range:4.0–8.5V
Antenna Length:150mm
JRPR03461 – RG812BPX 8CH Power Bus DMSS XBus Receiver – $129.99 MAP
Based on the proven RG712BX Receiver, JR’s new RG812BX not only features an additional 8th channel, but a unique “hybrid port” that allows the Aux 3 servo ports to be used either as conventional PWM servo ports, or as a direct XBus serial connection.
Featuring path diversity antennas for outstanding signal reception, and increased telemetry signal syncing. With path diversity antennas, a remote antenna is not required, but an RA02TL remote may be added to the RG812BX for additional antenna diversity, further enhancing signal reception. The RG812BX allows you to simplify your antenna setup, have the security of full range operation, while still enjoying the benefits of built-in telemetry and XBus functionality.
The RG812BX utilizes JR’s robust DMSS modulation system that combines attribute from both DSSS and FHSS modulation into a wide-band transmission system with high-speed response and high resistance to RF noise. Also unique to DMSS is JR’s Intelligent Output System (IOS), which automatically selects control signals that need to be transmitted simultaneously and delivers the data as one complete signal frame. IOS ensures there is no time delay when commanding servos used for critical functions such as a CCPM swashplate on a helicopter or with an aircraft with multiple servos ganged on a single control surface. This gives a stronger connection in flight and can reduce wear on components, keeping your model flying better, longer.
Not only does this receiver listen, but it talks back as well. DMSS is a bi-directional communication system that delivers real-time telemetry information. Receiver voltage telemetry is standard with every DMSS receiver, and add-on sensors are available to monitor nearly every metric vital to the operation of your mode.
Features:
- 8 Channel Capability, XBus Equipped, DMSS Reliability
- Path diversity antennas provide full-range signal and telemetry data without a remote
- antenna
- 5-channel standard PWM output and single shared XBus or PWM output can be used
- parallel with one another for additional capability.
- EZ BIND capable- no bind plugs necessary!
- Low power consumption
- Option to add RA02TL remote for additional path diversity in more complex installations.
Specs:
Receiver Voltage Telemetry: Standard
Type: full-range
Channel Count: 8
Modulation: DMSS
Band: 2.4Ghz
Length: 1.87 in (47.5mm)
Width: 1.01 in (25.5mm)
Height: 0.57 in (14.5mm)
Weight: 0.53oz (15g)
Input Voltage: 4.0–8.5V
Case Type: hard plastic
Antenna Length: 150mm
JRPR03462 – RG812BX 8CH DMSS XBus Receiver – $89.99 MAP
