Looking for all great ideas!

Looking for all great ideas!

Do you have a great idea that can save your fellow modelers some time and money?  Well send it on in and we may use it in “Tips and Tricks”. We’ll award you a Model Airplane News baseball cap and an Alien Aircraft kit for every idea used in “Tips & Tricks.” Send a rough sketch and a brief description to Model Airplane News, c/o Air Age Media, 88 Danbury Rd., Wilton, CT 06897 USA. Be sure that your name and address are clearly printed on each submission. Because of the number of ideas we receive, we can neither acknowledge each one nor return unused material.

Model Airplane News - RC Airplane News | Looking for all great ideas!

Model Airplane News - RC Airplane News | Looking for all great ideas!

Updated: July 15, 2015 — 3:38 PM


  1. Hi John,

    I loved the review of the Seagull Mew Gull in the July 2011 issue. I have wanted to model this aircraft for decades and now was my chance. However it is sacrilege to have an exposed engine in an aircraft with an in line cowl, so I had to relocate the engine mount on the firewall for an inverted installation. This meant putting the blind nuts into place in a very inaccessible situation.

    What saved the day was that I used my magnet tool, I don’t know its correct name but it’s a magnet on an extendable rod for when you drop a screw or nut into any inaccessible place. I used the magnet to hold the blind nut while I engaged it with the machine screw. I then tightened the machine screw and it pulled the blind nut into position. Sounds like it would be too mobile but in fact worked a treat.

    Thanks again for a great magazine and best regards,

    Peter Kraus

    PS 2 criticisms of this beautiful ARF kit:
    1; Firewall poorly fuelproofed and compartment behind it not at all. OK for electric but I’m using OS 120 FS. Sprayed in there as best I could with clear acrylic.
    2: Correct thrustline very difficult to determine if using inverted engine. Got there in the end and plugged up all the holes, (for electric mount, for original slanted mount, and my mistakes,) with dowel.

  2. I do believe all of the ideas you have introduced in your post. They are very convincing and will certainly work. Still, the posts are very quick for starters. May you please extend them a little from next time? Thanks for the post.

Comments are closed.

Air Age Media ©
WordPress Lightbox