Precision Cut Kits Giles 202 & 300

Model Airplane News - RC Airplane News | Precision Cut Kits Giles 202 & 300

PCK continues to expand its line of build it yourself aerobatic aircraft with the release of the 87″ Giles 202 & 300.  This all balsa and ply beauty is fully aerobatic limited only by the pilot’s expertise.  The prototype model was flown with a Brison 4.2 turning a 24/10 prop.  The prototype weighed 19.5 lbs and had unlimited vertical.  The redesigning of some parts should provide a finished model weighing 17 to 19 pounds.  Engine recommendations range from a G-62 to a 4.8 and most twin cylinder engines will fit into the cowl.  Construction follows standard building procedures, but it should be noted this model is not intended for the novice or beginner.  Wood kits, cowls, canopies, and landing gear are available directly from Precision Cut Kits. Kits and parts may be purchased separately or as a “package”.  PCK will also be releasing an Edge 540 and an Edge 540T in the near future. Please visit our web site for more information.


is dedicated to customer service. Feel free to phone, fax, e-mail, or write us about any questions or concerns you may have regarding your next project.

Telephone: 609-538-1388
Fax: 609-883-0926

Postal address:

Precision Cut Kits
63 Carlton Ave.
Ewing, NJ 08618

General Information:

Updated: August 5, 2008 — 10:00 AM


  1. Hi,
    My canopy is in bad shape. I would like to make in several copies my canopy of my plane Giles 202.
    What would be the cost of my project?
    Thank you

  2. looking for cog for giles 300 50cc

Comments are closed.

Air Age Media ©
WordPress Lightbox