Pterodactyl Ornithopter

Pterodactyl Ornithopter

From HobbyKing:

Looking for something different? Recreate Jurassic Park with a radio controlled Pterodactyl Ornithopter complete with a screeching sound module.

The EPP foam body and head protect the wing flapping mechanism and electronics, while providing an authentic look. The Pterodactyl has been fine tuned for stable flight without the need for special electronic stabilization. This ready to fly, all-inclusive model has two lipoly batteries included, one for the transmitter, the other to power the model itself.

Included is a screeching sound module and LEDs in the eyes that are activated by a button on the transmitter. Wing flapping motion is powered by brushless outrunner gear reduction system and a small 3S Lipoly battery. The wings and tail feathers are a basic skeleton of carbon rods, with a realistic looking pattern printed on the rip stop nylon skin.

This is truly unique model and you’ll really enjoy flying the Pterodactyl


  • Attach wings, charge batteries, connect your radio gear and fly!
  • EPP Foam body over rugged plastic chassis
  • Printed rip stop nylon wings
  • Remotely activated realistic screeching sound module and LED eyes
  • Different and fun!
  • Quick assembly
  • Wall charger (US Plug)


Wingspan: 1300mm
Length: 1000mm
Weight: 650g


Battery: 3S 11.1V 1300mAh LiPoly
Transmitter: 4CH Transmitter and Receiver

611000003-0 – Pterodactyl Ornithopter EPP Composite 1300mm Red (PNF) – $208.27
611000004-0 – Pterodactyl Ornithopter EPP Composite 1300mm Green (PNF) – $208.27

[nggallery id=469]

Updated: October 8, 2015 — 2:27 PM
Air Age Media ©
WordPress Lightbox