Sneak Peek — HyperBipe from Durafly

Sneak Peek — HyperBipe from Durafly

Just test flown for a future review in MAN, is the new Aerobatic HyperBipe from Durafly. Available from Hobby King, this sleek aerobatic multi-wing model is a PNF (Plug and Fly) design and has quick and easy assembly, pre-installed 3S power system including motor and ESC, and Fully hinged surfaces. It features rugged molded EPO foam construction and easy access to the motor, servos and power system with two molded, quick release hatches. Includes all hardware and Instructions and assembly takes about an hour.

HyperBipe from Durafly

Specs:
Wingspan: 34 inches
Length: 34 inches
Motor: 2212 1400kv brushless outrunner
ESC: 30A w/BEC
Servos: 4 x 9g micro servos
Prop Size: 9 x 5

HyperBipe from Durafly

Requires: Your own 4CH transmitter/receiver and a 800~1300mAh 3S lipo battery pack.

HyperBipe from Durafly

Watch for John Kauk’s detailed review in an upcoming issue of MAN.

Video from Durafly.

Updated: July 29, 2015 — 12:31 PM

1 Comment

  1. Damn that trim is ugly!

Comments are closed.

Air Age Media ©
WordPress Lightbox