Snoopy Flies Again!

Snoopy Flies Again!

Watch out Red Baron!!! That’s right, Model Airplane News has redrawn the classic plans for Al Signorino’s 1969 RC Snoopy’s Doghouse and we’ve cleaned them up with CAD.

Model Airplane News - RC Airplane News | Snoopy Flies Again!

The old original plans were falling apart and so it was time for an upgrade! If you are a Snoopy fan, watch out for the new 50th Anniversary Special Edition plans in an upcoming issue of MAN. For those who know Snoopy’s Flying Doghouse, this is the improved version that was published in 1971 with the extended fuselage box added to re-balance the model so Al could remove some 2 pounds of lead from the model! We’ve very excited!Model Airplane News - RC Airplane News | Snoopy Flies Again!

Model Airplane News - RC Airplane News | Snoopy Flies Again!

being test flown without the freewheeling pilot on the roof, the doghouse is a blast to fly.

Model Airplane News - RC Airplane News | Snoopy Flies Again!

Model Airplane News - RC Airplane News | Snoopy Flies Again!

Ready for a perfect louchdown and landing.

Updated: January 11, 2021 — 9:40 AM

4 Comments

  1. Nice love rare flying planes would love to buy one of those if every you want to sell please make me first to give. A offer

    1. Anthony, you may have to build one of Snoopy’s Flying Doghouses yourself. That is what I am going to do.
      I bought a set of “new” 50th Anniversary Special Edition plans From Air Age Store. Then I started to gather the necessary materials – Man, balsa got expensive !

      Then I found a short kit From LDS Laser Design Services, so I bought one. I’m waiting for that to arrive.

      This begs to be powered by a Gasoline Engine (15 cc?) and have vintage WWI wheels.

      To continue the theme, I bought a 35 inch wingspan Fokker Dr.1 triplane short kit From Manzano Laser Works.

      I will have plenty to do as the winter building season continues here in the Northland.

      Curse you, Red Baron
      Mars 2020

  2. That’s a really cute plane with snoopy.

  3. Hello,

    I would like to design it in FoamBoard for an electric motor, it would be very light, I have the original plans and they are very blurry, is it possible to obtain the plan they made in PDF?

    I have a laser cutter and would send back the plans for the design for FoamBoard

    Greetings,

    Ricardo Hoyos

Comments are closed.

Air Age Media © 2022
WordPress Lightbox