From HobbyKing:
The Sonic FX is an impressive 1000mm flying wing made from ultra-tough EPO foam. The FX offers you all of the performance of its bigger siblings in the Sonic range in an easy to transport size and being Plug and Fly, the Sonic FX will have you in the air in no time.
Practicality was the keynote when designing this airframe and this can be seen right through the model. From the one-piece design to the molded hatch catch for positive locking, the ample cooling vents, pre-fitted XT60 connector and molded hand-hold for launching, the Sonic FX is designed to make life easy!
The state-of-the-art airframe with its low profile twin fins and leading edge strakes not only performs like a pedigree, but looks the part too in its striking hi-viz color scheme.
A pre-installed 2212 2280kv brushless outrunner gives plenty of power for any maneuvers you care to think of with this 3 channel model while letting you push the flight envelope to the limits of high and low speed flight. The glide won’t disappoint you either.
All in, the Sonic FX is a fantastic all round fun model with a performance only limited by your imagination (did somebody mention FPV?)
Features:
- Ultra-tough EPO foam construction
- Large cooling holes for the battery compartment
- Pre-installed brushless power system and servos
- Fast, agile and aerobatic
- High-viz color scheme
Specs:
Wingspan: 1000mm
Length: 532mm
Propeller: 6 x 4
Motor: 2212 – 2280kv Brushless outrunner
ESC: 40A w/BEC & XT60 connector
Battery: 3S 11.1V 2000~2500mAh LiPoly
Servos: 9g x 2
Flying Weight: 530~550g
Included:
- Sonic FX EPO 1000mm Flying Wing
- Hardware (installed)
- Manual
Required:
- 4 Channel TX/RX with elevon mixing
- Adhesive
- 2000~2500mAh 3S (11.1V) LiPoly battery
#9095000118-0 – $99.00
Visit HobbyKing.com
See more posts about HobbyKing
