MAN Site membership 900x250
Log In
Access Premium Site»
Not a member? Join today!

Building


Giant-Scale Hinging Video How To

Giant-Scale Hinging Video How To

Here’s some great techniques for properly installing giant scale hinges. Editor Gerry Yarrish shows the process from his workshop when he was building his 1/3-scale Balsa USA Fokker Triplane. Photos by Tim Haggerty
Make Laminated Formers

Make Laminated Formers

If you have been building RC warbirds for a while, you may notice that there is a terrible blight plaguing many of them… tail-heaviness!  The scourge of tail-heaviness leaves the modeler with few good options.  First, he can fly the model as-is with the CG at the limit of its aft location and stagger around […]
Venom Pro2 Charger 600x120
RC Fuel Systems 101: A Video Summary of fuel line fittings and accessories

RC Fuel Systems 101: A Video Summary of fuel line fittings and accessories

Now with the cold weather outside, is a great time to pull some fuel tank maintenance. To get the best possible performance from your glow and gas powered airplanes, you have to properly install and maintain your entire fuel system. From assembling and installing the tank itself correctly (with foam padding), to installing  in-line filters […]
RC Airplane Fiberglass Parts  – Plugs, Molds, and Layups

RC Airplane Fiberglass Parts – Plugs, Molds, and Layups

Fiberglass cloth, resin, and molds are commonly used to make multiple copies of model-airplane parts. Ideal for duplicating parts with a complex shape, molded fiberglass parts are also much lighter and stronger, and can be produced more quickly than parts made out of solid-wood blocks. For this article, we are going to make a simple […]
Digital Downloads 600x120
RC Airplane Modeler’s Tips

RC Airplane Modeler’s Tips

Everyone appreciates a good building tip or trick — especially when it makes our hobby easier and more enjoyable! Here are a few of our favorites. Send your tips to MAN@airage.com!   Propeller Balancer (Clear Spray Paint) While balancing plastic propellers instead of removing material from the heavier blade, use clear spray paint to add weight to the lighter […]
Giant RC Aichi Takes Flight

Giant RC Aichi Takes Flight

You don’t often see an RC version of the Japanese Aichi D3A (called “Val” by the Allies), and this one is a stunner. Jörg Albrecht’s 1/3.2-scale, 147-pound, model has a 14.5-foot wingspan and is powered by a Valach VM R420cc, four-stroke, five-cylinder radial. Thanks to RCGiantScalePlanes for taking this video at the Icare Airmeet.
RC Aerobatics: Fly the Elevator

RC Aerobatics: Fly the Elevator

The first 3D maneuver many pilots learn is the “elevator.” During an elevator, the airplane remains fully stalled and drops almost vertically in a flat attitude. Start by pointing the airplane directly into the wind. Cut the throttle and increase upelevator to enter a stall. At the moment the plane stalls, hold in full up-elevator […]
RC Plane How to: Install Retractable Landing Gear

RC Plane How to: Install Retractable Landing Gear

Setting up the gear doors on the P-51 for the first time isn’t that difficult assuming you are given some ground rules. I’ve been building for many years, but never set one up with the scale features as on the CARF P-51. The P-51 has outer doors attached to the retract struts and inner gear […]
RC Airplane First Flight Success

RC Airplane First Flight Success

For the first-time RC modeler, today is a great time for getting started in the hobby. The newest generation of easy-to-assemble, almost-ready-to-fly planes come in a wide variety of types and sizes. From electric- powered park fliers and micro scale designs to your basic engine-powered, nitro-burning sport and trainer planes, the amount of work on […]
Model Airplane News RC Model Reader Tips

Model Airplane News RC Model Reader Tips

These field and bench tips are all courtesy of MAN readers (the best aircraft modelers around!). Here are a few of our favorites; bet you’ll use at least one! (Have a tip you’d like to share? Send it to MAN@airage.com!)   GARAGE STORAGE SPACE When you need more storage space for wings, the garage door can […]
RC Aerobatics: the snap roll: do it right!

RC Aerobatics: the snap roll: do it right!

The snap roll is an advanced maneuver that you’ll first encounter in the IMAC Sportsman sequence. It evolves into more difficult variations in the upper classes of competition. It is one of the most difficult maneuvers in which to consistently achieve a high score because it requires a keen sense of timing, throttle management and […]
UNDERSTANDING RC GIANT-SCALE GASOLINE ENGINES

UNDERSTANDING RC GIANT-SCALE GASOLINE ENGINES

It’s easier than you think. Many RC modelers today start out with small, electric-powered ARFs, and work up from there. As they get more involved in the hobby, the next logical step up the power scale is operating nitro-burning glow engines (2-stroke or 4-stroke), and learning how to keep internal combustion engines happy. When you […]
Airage Media © 2018
WordPress Lightbox