If you are a WW1 fan and have been keeping track of the modeling events over the year, then you know that the Old Rhinebeck Aerodrome was again alive with RC action this past weekend. Hosted by the Mid-Hudson R/C Society club, the 51st annual WW1 RC Jamboree enjoyed amazingly nice weather and mild winds […]
This 58%-scale model of the Czech aerobat is powered by ZDZ 420cc twin cylinder inline engine and has a wingspan of 14.75 feet. In this video, pilot Zdenek Hulka puts the 216-pound model through its paces at the Megaflugshow in ... Continue reading ... Join our premium membership!
The best readers have the best tips! Here are four workshop tips submitted by MAN readers that we think will make your life easier. LEAD KEEPERS Here’s an easy way to prevent those aileron and flap Y-harness leads from slipping inside the fuselage or wing. When the leads are disconnected from the wings, use the little […]
A rudder turn is performed using the rudder to yaw the nose of the airplane in the direction that you want to turn, and while space does not permit going into all the details, most airplanes will also inherently bank in the direction that the rudder is applied. There are basically two different techniques […]
Just in time for the upcoming Old Rhinebeck Aerodrome RC WW1 Jamboree, our .25-size Fokker E-III Eindecker is ready for action. We offered the CAD drawings for this sport mission-ready machine in Part 1 of this series in a downloadable PDF. The prototype highlighted here was build, covered and finished up in only four weekends […]
When I made my landing gear for my Sopwith Camel project, I did it the old-fashioned way–I cut and bent all the parts from music wire, wrapped the joints with thin copper wire and soldered everything together. So, the first step for producing any wire landing gear is to install the two main verticals onto […]
You asked for ’em, we’ve got ’em! Here are four terrific shop tips you can use this weekend to make your time in the workshop easier and more enjoyable. Don’t forget to send us your favorite tip! SMOOTH OPERATOR Razor saws are handy for cutting various materials, but their teeth sometimes “snag” the material, […]