flying


Force RC F-18 Blue Angel V2 PNP, 64mm EDF

Force RC F-18 Blue Angel V2 PNP, 64mm EDF

From Horizon Hobby: The full-scale F-18 has proven itself time and time again as the U.S. Navy front-line air superiority aircraft. There’s almost no task it can’t handle from air strikes, close air support, refueling, anti-shipping, forward air control missions or dramatic precision-aerobatics demonstrations. The Force RC® F-18 Blue Angel model has everything from high-speed […]
RC Models, Mastering the Lomcevak– Perfecting the classic aerobatic maneuver

RC Models, Mastering the Lomcevak– Perfecting the classic aerobatic maneuver

As aerobatic RC pilots develop their skills, it’s natural to try different control inputs while flying.  And, quite often new aerobatic maneuvers are discovered by pushing the envelope. The classic Lomcevak is a tumbling maneuver where the aircraft’s tail rotates in front of the engine throughout the maneuver. The maneuver has Eastern European roots and […]
RC Motors Understanding Gas-powered Engines – Big Block Power

RC Motors Understanding Gas-powered Engines – Big Block Power

Whether your ultimate goal is to fly big 3D aerobatic planes or to pilot giant-scale warbirds, understanding how gasoline engines operate and how to properly set them up is extremely important. Besides their great fuel efficiency, gas engines are reliable, easy to start and overall are very user-friendly. Like all power systems, however, they need […]
RC Model WW1 RC Jamboree — And the Winners are…

RC Model WW1 RC Jamboree — And the Winners are…

If you are a WW1 fan and have been keeping track of the modeling events over the year, then you know that the Old Rhinebeck Aerodrome was again alive with RC action this past weekend. Hosted by the Mid-Hudson R/C Society club, the 51st annual WW1 RC Jamboree enjoyed amazingly nice weather and mild winds […]
58%- RC Scale Akrobat Special

58%- RC Scale Akrobat Special

This 58%-scale model of the Czech aerobat is powered by ZDZ 420cc twin cylinder inline engine and has a wingspan of 14.75 feet. In this video, pilot Zdenek Hulka puts the 216-pound model through its paces at the Megaflugshow in ... Continue reading ... Join our premium membership!
RC Model Tips & Tricks

RC Model Tips & Tricks

The best readers have the best tips! Here are four workshop tips submitted by MAN readers that we think will make your life easier.   LEAD KEEPERS Here’s an easy way to prevent those aileron and flap Y-harness leads from slipping inside the fuselage or wing. When the leads are disconnected from the wings, use the little […]
RC Model Airplane Flight Tech: Tips for Rudder Turns

RC Model Airplane Flight Tech: Tips for Rudder Turns

A rudder turn is performed using the rudder to yaw the nose of the airplane in the direction that you want to turn, and while space does not permit going into all the details, most airplanes will also inherently bank in the direction that the rudder is applied.   There are basically two different techniques […]
RC WW1 Jamboree Ready Eindecker — Part 3

RC WW1 Jamboree Ready Eindecker — Part 3

Just in time for the upcoming Old Rhinebeck Aerodrome RC WW1 Jamboree, our .25-size Fokker E-III Eindecker is ready for action. We offered the CAD drawings for this sport mission-ready machine in Part 1 of this series in a downloadable PDF. The prototype highlighted here was build, covered and finished up in only four weekends […]
RC Model – Soldering Landing Gear — Old-School Tips for Giant Scale Mains

RC Model – Soldering Landing Gear — Old-School Tips for Giant Scale Mains

When I made my landing gear for my Sopwith Camel project, I did it the old-fashioned way–I cut and bent all the parts from music wire, wrapped the joints with thin copper wire and soldered everything together. So, the first step for producing any wire landing gear is to install the two main verticals onto […]
RC Model Workshop Tips

RC Model Workshop Tips

You asked for ’em, we’ve got ’em! Here are four terrific shop tips you can use this weekend to make your time in the workshop easier and more enjoyable. Don’t forget to send us your favorite tip!   SMOOTH OPERATOR Razor saws are handy for cutting various materials, but their teeth sometimes “snag” the material, […]
RC Model Tail-Draggers — Pro Tips for Smoother Landings and Takeoffs

RC Model Tail-Draggers — Pro Tips for Smoother Landings and Takeoffs

The typical scale tail-dragger looks great both in the air and resting on the flightline between flights. But it does require a different technique to take off and land compared to a tricycle-gear airplane. From sport planes and classic civilian aircraft to warbirds and fighters, where the little “steering” wheel is in back behind the […]
Air Age Media ©
WordPress Lightbox