Sneak Peek – Venture FPV Quadcopter Test Flight

Sneak Peek – Venture FPV Quadcopter Test Flight

We are test flying this new H-configured multirotor from Hobby King.

v5

This impressive rotordrone comes equipped with its own factory installed 5.8GHz FPV camera and onboard video transmitter which is tuned for the Fat Shark and similar FPV goggles and ground station receivers.

v2

Guided by the popular NAZA-M Lite flight control system, the Venture is rock steady in hover and features GPS navigation. Watch for a full report in the next issue of MAN.

[nggallery id=333]

v4

A peek under the hood shows a very compact well designed layout. The motor outriggers are metal tubes with the wiring inside for added protection.

venture1

This is a plug and fly Quad so you install your own receiver and connect it to the included NAZA flight controller.

Assistant Program

Using the downloaded Assistant Program and it’s easy to us Dashboard, you program and calibrate the quadcopter’s control system and your transmitter.

v8

 

Updated: July 20, 2015 — 12:23 PM

2 Comments

  1. I’m building a Reptile R500 with a NAZA-M lite navigation unit but GPS didn’t come with the NAZA-M when I ordered it. Do you feel it advisable to have the NAZA GPS unit on board? Your unit looks extremely reliable in flight just wish it was a video

  2. HI Gerry, do you still print the book “R/C Pilot’s Handbook”? I am creating a college course on flying UAS vehicles and will be training new R/C pilots. Any assistance on helping new students get into this field will be helpful.
    Thanks, Ed

Comments are closed.

Air Age Media ©
WordPress Lightbox