Literally hot off the printing presses, this new very easy to apply, Iron-on WW1 German Camo is now available from Wildmann Graphics.
This great new printed fabric Lozenge fabric is the work of Chris Sellmann of Wildmann Graphics and I have to tell ya, it’s great stuff! All you have to do is roll it out and iron it on! The Ink is printe directly onto a SolarTex like fabric called WildTex, and it goes over curved surfaces very easily using an ordinary covering iron! Since it is a fabric, all you have to do is seal the weave when you’re done with a spray clear coat such as Krylon Crystal Clear (for gasoline) or with Great Planes Lustor-Kote spray (for glow power). Chris is a Giant scale modeler at heart with a passion for WW1 biplanes, so, he has accurately reproduced the 4-color camo pattern in upper- and lower-wing surface schemes as well as in the 5-color pattern. Available in 1/4-scale these fabrics are available in 2 meter rolls and cost $70.
wildmanngraphics.com; (406) 892-1911
I’m buliding the Zeppelin-Staaken XIV”R” Bomber that in jule 2010 of Model Aviation. Do you have the color Lozenge for that plan. Thank Steve
hay i bout a old fokker d-7 and nead camouflage for it thanks
The website is no longer. 🙁
Hi,
I have recently started collecting original lozenge fabric. However, I am considering getting a lozenge duvet made.
I have not been able to find full size reproduction material to do this.
/Q/ Would Wildtex with your lozenge print work as a duvet material, i.e. would it survive a washing machines etc?
thanks
Simon
How I can get Iron-on WW 1 ?
Hi I would like to know if it’s possible to buy the Iron-on WW1 German Camo plastic covers. What size are aveilable?
Thank you
Adriana Ros