Here’s some great techniques for properly installing giant scale hinges. Editor Gerry Yarrish shows the process from his workshop when he was building his 1/3-scale Balsa USA Fokker Triplane.
Photos by Tim Haggerty
Here’s some great techniques for properly installing giant scale hinges. Editor Gerry Yarrish shows the process from his workshop when he was building his 1/3-scale Balsa USA Fokker Triplane.
Photos by Tim Haggerty
Show More |
Do you have a video to share with Model Airplane News? Submit your video here.
I have been using clear Gorilla glue and it works great
When they said “Giant” I was expecting something big.
Canopy glue is something I would never have thought of, and I didn’t know Robart had a drill guide! Excellent and very helpful video!
Been using the canopy glue. For a while, I believe it was Pacer, there was a water based hinge glue. It was similar to the canopy glue but a little thicker. It worked very well but I haven’t seen it on the market lately. The water based glue makes cleaning around the hinge and hinge line a whole lot easier than using epoxy .